Download/View Certificate


Printable PagePrintable Page  Email This PageEmail This Page

Noise Control Enclosure for the Compressor Industry

Click on Thumbnail to Enlarge
Two Piece Noise Control Enclosure
Noise Control Enclosure
Two Piece Noise Control Enclosure
  Two Piece Noise Control Enclosure
Noise Control Enclosure
Two Piece Noise Control Enclosure
  Two Piece Noise Control Enclosure Wireframe
 Noise Control Enclosure
Two Piece Noise Control Enclosure Wireframe

Contracted by a client from the compressor industry to construct a series of noise control enclosures, Paragon Plastics employed its advanced forming and CNC machining technologies to produce these enclosures. Constructed from black ABS hair-cell plastic measuring 34" x 34 " x0.187" in overall dimension, we formed each unit to the full detail of the mold, ensuring that each enclosure met the customer’s specifications. Each finished noise control enclosure measured 12.549 " in height and 12.115" in width.

We then trimmed the perimeter of each half and drilled four, 0.26” holes. After the units were manufactured, we cleaned and deburred each enclosure and performed a final inspection for cosmetic defects and dimensional tolerances. We then attached inspection labels and tracer tags before packaging for shipment to our client.

Our recognized expertise in thermoforming allowed us to exceed this customer’s expectations.  We can do the same for you.  Call us today about your next project.


Back to Top

Product Description

Capabilities Applied/Processes Forming
CNC machining
Packaging
Equipment Used to Manufacture Part Single-station forming machine, 5-axis CNC router
Overall Part Dimensions Material: 34" x 34" x 0.187"

Finished:
Width: 12.115"
Height: 12.549"
Tightest Tolerances ±0.020"
Material Used Black ABS Haircell
Typical Operations Forming:
Form to fulldetail of mold
Inspect for defects
Pack for next operation
Attach tracer tag before moving on
CNC Machining:
Generate four 0.260" holes
Perimeter trim each half
Clean and debur
Attach tracer tag before moving
Special Features  
In process testing/Inspection performed Inspect 0.260" holes using calipers on every tenth part
Inspect for cosmetic defects
Place inspection label on backside of part
Estimated Part Weight 4 lbs
Industry for Use Compressor
Quantity 2000
Delivery Location Florida
Standards Met Customer supplied print, 3D CAD Drawing
Product Name Noise Control Enclosure

Back to Top
Site created by ThomasNet Web Solutions